bing tracking image
  1. Tow Bar Wiring
  2. Blue Ox
  3. Fuse Bypass
  4. Bypasses Vehicle Wiring
  5. Engine Compartment
  6. Custom
Blue Ox Fuse ByPass Switch for Towed Vehicles - ATM Mini-Fuse - 13" Long

Blue Ox Fuse ByPass Switch for Towed Vehicles - ATM Mini-Fuse - 13" Long

Item # BX88272
Retail:$83.55
Our Price: $53.29
You Save: 36%
Tow Bar Wiring
Shipping Weight: 0.31 lbs
Add to cart
BX88272 - Mini Fuse Blue Ox Tow Bar Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Use this fuse-disconnect system to prep your vehicle to be towed. Simply relocate your car's fuse with this bypass and flip the integrated switch. To drive your car, just flip the switch back on. No need to remove or replace your fuse. Great Prices for the best tow bar wiring from Blue Ox. Blue Ox Fuse ByPass Switch for Towed Vehicles - ATM Mini-Fuse - 13" Long part number BX88272 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (80)
  • Q & A (0)
  • Photos

Blue Ox Tow Bar Wiring - BX88272

  • Fuse Bypass
  • Bypasses Vehicle Wiring
  • Engine Compartment
  • Custom
  • Blue Ox
  • Mini Fuse

Use this fuse-disconnect system to prep your vehicle to be towed. Simply relocate your car's fuse with this bypass and flip the integrated switch. To drive your car, just flip the switch back on. No need to remove or replace your fuse.


Features:

  • Bypasses towed car's fuse so you can tow your vehicle without draining its battery
    • Provides a simple alternative to removing mini-fuse every time you tow
    • Stores fuse so that you won't lose it
  • Installs quickly, easily and permanently
    • Remove mini-fuse from car's fuse box and install Fuse ByPass in its place
    • Put fuse into Fuse ByPass fuse holder
    • Mount bypass switch near fuse box
  • Maintains functionality of mini-fuse when switched on
    • Flip switch to "on" position and drive like normal
  • Overrides mini-fuse when switched off
    • Flip switch to "off" position and you're good to tow
  • Made in the USA


Specs:

  • Overall length: 13"
  • 1-Year warranty


Note: Consult vehicle's owner's manual to determine which fuse to pull. Do not install a fuse in the Blue Ox Fuse ByPass that has more than a 20-amp rating.


Some automobiles can only be towed if you get under the hood and pull a fuse. If you don't remove this fuse before towing, there's a good chance that your car's battery will be drained by the time you reach your destination.


With the Blue Ox Fuse ByPass, once the initial installation is complete, you won't have to remove or replace your fuse again. Just pull the fuse indicated in your car's owner's manual and replace it with the bypass. After you install the Fuse ByPass, insert the removed fuse into the holder of the bypass system. With the fuse installed in this manner, it will still be able to function as needed. Mount the included switch near the fuse box and you're set.


Whenever you need to drive your car, just make sure the switch is flipped into the "on" position. When on, the fuse will be active and your vehicle will function normally. Then, when it comes time to tow, switch the Fuse ByPass to "off." When off, the fuse will be rendered inactive so that you can flat tow your car without its battery being drained.



BX88272 Blue Ox ATM MiniFuse By Pass Switch - 13" Long





Customer Satisfaction Score:


Customer Reviews

Blue Ox Fuse ByPass Switch for Towed Vehicles - ATM Mini-Fuse - 13" Long - BX88272

Average Customer Rating:  4.6 out of 5 stars   (80 Customer Reviews)

Use this fuse-disconnect system to prep your vehicle to be towed. Simply relocate your car's fuse with this bypass and flip the integrated switch. To drive your car, just flip the switch back on. No need to remove or replace your fuse.

by:

The Blue Ox fuse bypass switch was just what I needed. The delivery was quick and installation was made easy by the instructions and video. Works as described and I will be trying out soon on our next trip towing our 2012 CRV. Thank you etrailer for making my life easier.

Eric W.

9/6/2018

Since installing the Blue Ox bypass we have gone to Texas and back with absolutely no problems. This has eliminated the battery drain problem totally. Great product as stated previously. Thank you George and E-Trailer



by:

Product was as advertised and delivered timely

Raymond

1/15/2024

This product is still working well.



by:

Order arrived much quicker than I expected. Item was well protected and package perfect! Thanks for the great service!



by:

This product works great for the purpose it is intended. Unfortunately, removing fuse #34 also disabled my 12v accessory and made it impossible to use my Blue Ox Patriot II. Weird because there are separate fuses for those. Therefore I have to return it.

Etrailer Expert

Jenny N.

5/1/2023

I would not return the fuse bypass kit just yet. Since you have to pull those fuses anyway when towing, what you will need is a 12-volt outlet kit, part # RM-9332. It has wiring to reach your battery and gives power to the braking system. I have a video on a 2010 Honda CR-V that shows the installation. This way you can still have the convenience the fuse bypass kit gives you.



by:

sed on my 2016 Ford C-Max Energi to stop pulling fuse 67 the Passport fuse to reset the MY FORD MOBILE APP and regain control over charging the battery.
( I charge my vehicle at 1 in the Morning ). Pulling that fuse 4 or more times a year to get things working was a real pain not to mention removing the cover each time. Since Ford never resolved the problem
with the communication issue this was a great fix. Thanks etrailer and Bule Ox this is a great work around.



by:

Plug & Play answer for towing my CR-V. No more dead battery from towing all day.



by:

Once again wiring too short for a 2014 Honda CRV to install it where there video shows also it was missing the connector to the fuse block. Wasted tiem and money splicing longer wires in.

Etrailer Expert

Brooke M.

10/26/2022

It looks like this plugs in behind the panel in twenty fourteen Honda CR Vs as you will see if you watch the install video. It is wire to wire connection and plugs in where the fuse would go.



by:

Works great!



by:

When two of the three items were no immediately available Davine (via the telephone) in customer service walked me through the process of using an alternative product. She expedited the orders and there were on there way within a couple of days. Friendly, helpful and knowledgeable service. The parts fit well and the videos were spot on.



by:

I have installed the Custom Tail light warning and the Trailer connector and it was very easy. I ran the wiring through inside the FIT wiring and it was very easy. Love the way everything snaps together.

I can't wait to install the base plate, trailer hitch receiver as well as the ByPass switch.

All these items will make our Motorhome experience much easier. Thanks etrailer

Thanks again to Amanda for keeping an eye on my order.

Ed V.

1/23/2018

I installed the product myself without any problems. We just got back from a cross country. We pulled our Honda Fit over 12,000 miles without any issues or concern.



by:

Fuse Bypass switch works great no more dead batteries, I have used it many times in the last year and I can pull my Honda CRV 8hrs or more and battery stays charged. very easy to install. took less than 1 hour to install

Bob S.

2/14/2018

After a year Bypass Switch still working as good as the day I installed it, still very satisfied.



by:

Purchased and installed in my 2010 Chevy HHR. Was an easy install, directions are very clear. This allows me to leave the key in the correct position while the vehicle is under tow by my RV and not drain the battery. However, I later determined that this meant my HHR brake lights would not operate when the brakes are applied by my Brake-Buddy system. I did install wiring from the RV to the brake lights of the HHR but that did not run the third/middle brake light. So I ultimately decided to install a system that connects my RV power to a charger on the HHR battery so I could leave the power on and have all my brake lights operating. As it turns out I could have done without this item. So it would be a choice of this item or an RV powered charging system depending upon how you would like your brake lights to operate.



by:

Great product, installed in 5 minutes. Will really save me a lot of time and keep me from getting on my knees with a flashlight and straining to pull and later reinstall the fuse! Item was installed in my 2012 Equinox.

Dan W.

12/16/2015

Great!



by:

The detailed product installation videos that etrailer.com has on their website are a big help, and a good reason to buy from them over some other company



by:

The Blue Ox Accessory Kit for the Aventa LX Tow Bar, the extra (2) Diodes, the Fuse By-Pass Switch, the Aventa LX Tow Bar and the Patriot Brake Unit all arrived in tact and in a timely manner. I really appreciate the help in defining what I need to tow my '09 Yukon behind our new Newmar Dutch Star. So far the wiring is complete - and works! I hope to have the Tow Bar hardware done this week - i'll try and get a picture. Thanks again!



by:

I installed your device in a Buick Terraza to disengage the power sliding door control when the intermittent alarm sounds while driving. It saves me from having to pull over and pull the fuse. Thank you for your product.

Thomas

12/14/2021

The device is still performing properly. Thank you!



by:

Great build quality-easy install.



by:

I recently ordered the Blue Ox fuse by pass switch for my Honda CRV. My order was sent out promptly and the staff at e trailer were knowledgeable and friendly! Please note: If you have a 2013 Honda CRV, this install takes a while due to the position of the fuse panel .Honda uses the mini fuses and you must purchase a standard fuse to place inline.....no big deal but, small hands and a contortionists body would make installation very much easier.



by:

Ive found etrailer is the best place to order anything for trailer or towing products. They have the product I want in stock and do a good job getting it to me. One of the few places I will use the name of the company in my key word search for a product.



by:

Justin was very nice and helpful over the phone, no pictures yet because it's kind of cold in Massachusetts so I will have to wait until it's a little warmer. I will install it myself. This will be the fifth vehicle I've done this on, just follow the directions.



by:

Received the part in a quickly amazing amount of time. Part came as advertised. However when I was installing the item into my 2014 Honda CRV the stem that installs in the removed fuse socket broke. Not finding a replacement part I called etrailer and they immediately responded by sending me a new part. Such customer service is truly noteworthy. Keep up the great service. I will continue to use etrailer as my source for parts and will highly recommend etrailer to friends and family.



by:

I installed it & it worked part of the time so I took it out & added a charging wire to the battery from the RV. Apparently my fuse block terminals are loose.



by:

My product a Blue Ox fuse bypass switch for a towed vehicle was received sooner than expected because etrailer upgraded my shipping at no additional cost. I haven't yet installed it to check performance, but expect to have no problems. Thanks eTrailer.



by:

So nice to not have to pull a fuse! Install was easy.



by:

Product is exactly as described and delivered on a timely basis. The only questions is why does UPS go from Colorado to Mo to Nashville to Knoxville then back to Nashville then to Clarksville. It seems to me they should of dropped it off the first time thru Nashville and would of received a day sooner.


25
80
Show More Reviews

See what our Experts say about this Blue Ox Tow Bar Wiring

  • Troubleshooting A Draining Battery On A 2002 Toyota 4Runner When Using The Rightline SUV Tent
    If your battery is dying because the hatch door is open when using the Rightline Gear SUV Tent with Rainfly # RL110907 then you have something staying on that needs to have the power cut. Most likely it's your lights so you can pull the dome light fuse (Fuse Number 5) and see if that solves your issue. To make it easy you can install the Blue Ox Fuse ByPass Switch for Towed Vehicles # BX88272 to simply turn the fuse on/off with a switch. If you notice you're still draining the battery...
    view full answer...
  • How To Disable the Auto Level Suspension While Towing With a 2011 GMC Yukon XL Denali
    The easiest way to disable the Continuous Damping Control Suspension (CDC) on your 2011 GMC Yukon XL Denali is to pull the " Electronic Stability Suspension Control, Automatic Level Control Exhaust" fuse which is located in the #2 position on the under hood fuse box. If you don't want to open the hood and do this each time you tow, you can install the Blue Ox Fuse ByPass Switch part # BX88272.
    view full answer...
    Image 1 for
  • Fuse Bypasses Needed To Flat Tow A 2015 Buick Enclave
    Hey Steven, To bypass the 15 amp ECM and Onstar fuses you can use the # RM76514 and for the 50 amp BATT1 fuse you can use the # RM-76517. These both come with switches to activate/deactivate the fuses. You'll likely need to splice in some extra wires to run them up to the dash for easier access.
    view full answer...
  • Recommended Fuse Bypass Kit for a 2023 Toyota RAV4 Using ATM-LP Low Profile Fuses
    For your 2023 Toyota RAV4, you can use the Blue Ox Fuse ByPass Switch for Towed Vehicles - ATM Mini-Fuse # BX88272. This is a universal kit that works with your ATM-LP low profile fuse and will bypass your toads fuse so your battery does not drain while being towed. Also, this part is not meant to be installed on a fuse that has more than a 20-amp rating.
    view full answer...
  • Fuse Bypass Recommendation for Flat Towing a 2015 Chevy Sonic
    The recommended fuse bypass for your 2015 Chevy Sonic is the part # RM76511. We confirmed this with our contacts at Roadmaster. I attached an install video for this bypass on a very similar 2016 Chevy Sonic as yours as well.
    view full answer...
  • Fuse Bypass for Flat Towing 2011 Honda Fit
    What you need is a fuse bypass. If your fuse is 20 amps or less you can use the Blue Ox Fuse ByPass Switch # BX88272. However, based on what other Honda Fit owners have reported it sounds like you have a 30 amp fuse. If that is the case, you will need the Blue Ox Fuse ByPass Switch - High-Amp Fuse # BX88274 which can handle up to 50 amps.
    view full answer...
  • Recommended Fuse Bypass Switch for a 2009 Honda Fit
    You are correct in that the Roadmaster FuseMaster Fuse Bypass part # RM76511 and the Blue Ox Fuse ByPass Switch part # BX88272 both have a 20 amp max fuse rating. This is mainly due to the gauge of wire that is used in the harness in relation to the distance that the circuit needs to travel. However, I do still have a solution for you that will not require you to physically pull the fuse each and every time and that is the Blue Ox Fuse ByPass High-Amp Fuse Switch part # BX88274 which...
    view full answer...
  • Can Blue Ox Fuse ByPass BX88272 be Used on a 2014 Honda CR-V
    Yes, your 2014 Honda CR-V can use the Blue Ox Fuse ByPass part # BX88272. For your CR-V normally the # 19 fuse needs to get pulled which is what the # BX88272 will allow you to do. However, in some cases the owners manual will state that you need to deactivate the # 20 fuse too which means that instead you could use the part # BX88273 which allows you to kill two circuits with one switch.
    view full answer...
  • Will a Blue Ox Fuse Bypass Work on a 1996 Geo Tracker
    Does the warning sound eventually go off if the door is shut on your 1996 Geo Tracker? If so that would save you the trouble of having to shut off power to those things to flat tow the vehicle. The Warning and Indicator lights use the fuse in location 8 in the fuse block located under the left side of the instrument panel. However this fuse is also for the ignition system, gages, and 4-wheel drive system. I am not certain that you could still flat tow the vehicle if there is no power to...
    view full answer...
  • Parts Needed and Procedure for Flat Towing a 2015 GMC Terrain
    According to the online manual for the GMC terrain that I reviewed the vehicle can be flat-towed once a few preparation steps are taken, including removal of fuse 32 to prevent battery drain. I suggest you refer to your owners manual, specifically the section identified in the index as Recreational Towing, just to confirm that your particular Terrain is suitable for flat-towing and to become familiar with the steps necessary. Here is what I found in the manual: 1. Position the vehicle...
    view full answer...
  • Does Rear Wiper Fuse Need to be Pulled to Flat Tow a 2019 Chevy Equinox
    According to the owner's manual for your 2019 Chevy Equinox there will be a power draw while you're flat towing so it calls for charging the battery during travel. This can be accomplished by using a wiring kit like the Roadmaster # RM26FR and then adding the Charge Line Kit # RM-156-25 so power from your motorhome will charge the battery. It's entirely possible that removing the fuse for the rear wiper will keep the battery from being drained but that's not something we've looked into...
    view full answer...
  • Parts Needed to Flat Tow a 2015 GMC Terrain
    In order to convert the 4-way trailer connector on your 2014 Thor ACE 29.2 to a 6-way trailer connector you would want to use the Mighty Cord Trailer Connector Adapter part # A10-6034VP. The adapter plugs into the 4-way you have on your RV and will require you to hardwire in 3 additional wires. The white wire is for the ground and will need to be attached to a clean bare metal surface. The black wire will then need to be ran to the battery with an in-line fuse holder such as part # SWC9539...
    view full answer...
  • What Fuses on a 2013 Buick Enclave Need to be Pulled Before it Can be Flat Towed
    I checked the owners manual for a 2013 Buick Enclave and you will need to remove the 15 amp OnStar and ECM fuse. These are in the battery compartment behind the passenger seat on the floor. You will also need to remove the 50 amp BATT1 fuse from the underhood fuse block. For your 50-amp fuse you can use Blue Ox ByPass Switch # BX88274 and for your 15-amp mini fuse Blue Ox # BX88272. What this will do is allow you to deactivate these circuits with just a switch instead of having to...
    view full answer...
  • Recommended Fuse Bypass For Flat Towing A 2013 Honda CR-V
    If your owner's manual says to only pull the #19 ACC radio fuse, you can use the Blue Ox Fuse ByPass Switch for Towed Vehicles # BX88272. If it states to pull the #19 ACC radio fuse and the #20 ACC key lock fuse you'll need to use the Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicle # RM76512. The Blue Ox Fuse ByPass Switch for Towed Vehicles # BX88294 you referenced is for ATC or ATO fuses. The fuses you'll be pulling are Mini, and ATC fuses are much larger.
    view full answer...
  • Fuse Bypass Switch Recommendation For 2008 Pontiac G8
    The fuse bypass switch that would be a fit for your 2008 Pontiac G5 is the Roadmaster FuseMaster, part # RM76511. This will allow you to flat-tow your vehicle without draining the battery. This does not have to be removed when you want to do normal driving. I have attached a link to a fuse bypass being installed. The vehicle is different than yours, but the installation would be similar and will give you an idea how this is installed. In case you do not have all of the components needed...
    view full answer...
  • Which Fuse Needs to be Pulled to Flat Tow 2013 Honda CR-V
    According to the online owner's manual for your 2013 Honda CR-V, for extended towing, you will remove the 7.5 A accessory radio fuse to prevent the battery from running down. This should be located in the interior fuse box. For a fuse bypass switch to use so you do not need to remove the fuse each time you tow your vehicle, I recommend looking at the Blue Ox Fuse ByPass Switch # BX88272. You will just relocate the specified fuse with this bypass and flip the integrated switch. To drive...
    view full answer...
  • Does Fuse Need to be Removed When Not Towing a 2018 Jeep Cherokee
    I do have a solution for you but since we don't carry or install Mopar parts I wouldn't be able to tell you if the service tech you spoke with knew what they were talking about or not. Typically a fuse is pulled to keep the battery from draining. I am not sure why a fuse would need to be removed when your 2018 Jeep Cherokee is not being towed though. If your fuse does need to be removed each time you are done towing your Jeep then I recommend installing a few bypass switch like the Blue...
    view full answer...
  • What Does the Blue Ox Fuse ByPass Switch for Towed Vehicles Shut Off On a 2014 Honda CR-V
    The Blue Ox Fuse ByPass Switch for Towed Vehicles part # BX88272 which is a fit for a 2014 Honda CR-V will need to be installed on the #19 ACC fuse slot. If done correctly, it will kill power to both the radio and navigation screens. The owner's manual actually identity's the wrong fuse for this so please disregard that. I have attached a photo below to clarify.
    view full answer...
    Image 1 for
  • Is Blue Ox # BX88272 the Correct Fuse ByPass Switch for my 2000 Chevrolet S-10 Blazer
    Yes, the Blue Ox, # BX88272, is the correct fuse bypass switch for your 2000 Chevrolet Blazer which requires the RDO BATT (Radio/Battery) fuse to be pulled during flat towing.
    view full answer...
  • Fuse Bypass Kit to Bypass 50-Amp and 15-Amp Mini Fuses in 2011 Buick Enclave
    For your 50-amp fuse you can use Blue Ox ByPass Switch # BX88274 and for your 15-amp mini fuse Blue Ox # BX88272. The Roadmaster FuseMaster Fuse Bypass Switch # RM76514 that you referenced does provide 2-fuse bypass capability but its amperage rating for both is 20-amps.
    view full answer...
  • Fuss Bypass Switch For Windshield Wiper Circuit
    We have a bypass fuse switch, the Blue Ox Fuse ByPass, # BX88272 it is designed for a different purpose but meets the description of what you are asking for.
    view full answer...
  • Does Brake Buddy Select Supplemental Braking System Drain Vehicle Battery
    The Brake Buddy Select 3 part # HM39524 like you have plugs into a power outlet in the tow vehicle to power the brake setup. So what that means is that it's draining your vehicle battery as it's being used. Using a fuse bypass won't prevent this from happening. Only solution is a battery charge kit like the part # RM-156-25 like it sounds like you tried which will keep the battery topped off so that when it's being used it will hopefully recharge.
    view full answer...
  • Parts Needed to Flat Tow a 2013 Buick Enclave Front Wheel Drive
    To flat tow your 2013 Buick Enclave you're going to need a tow bar, base plates, wiring for the lights, a supplemental braking system for the brakes, and possibly a high-low adapter. I suggest the Blue Ox # BX1708 for a base plate kit. To connect to the RV I like the Avail # BX7420 for a tow bar because of the 10,000 pound weight capacity. The Avail also includes safety cables. To power the lights of the Enclave use the diode kit # RM-154. According to an online owner's manual for a...
    view full answer...
  • How To Cut Power To A Jensen Mechless RV Stereo That Won't Turn Off
    First, I recommend removing your Jensen Mechless RV Stereo # JWM10A from the wall and removing the fuse from the back of the unit to fully reset it. If this doesn't fix the issues you're having with the unit not powering down when you press the power button then you can install a fuse bypass switch like the # BX88272 to cut the power with the flip of a switch.
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Tow Bar Wiring?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Nicholas E
Test Fit:
Nicholas E
Employee Andrew S
Test Fit:
Andrew S
Employee Shane H
Test Fit:
Shane H
Employee Clayton O
Test Fit:
Clayton O
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.